+86-13760274054 中文版 English

Linear Holes Drilling Machine

Linear Holes Drilling Machine adopt the touch screen to set the parameter, which can be used continuously to drill the hole, the hole spacing can be setting.

DETAILS

Equipment characteristics:

1 stepless speed regulation (0~3000rpm), free adjustment speed.

2 stepless adjustment of punching and cutting knife speed.

3 quick change mode, quick change knife.

4 numerical control parameter setting, the number and spacing of holes.

5 reset top out, automatic back chip.

6 high speed feed, fast drilling. (average drilling speed: 0.5s/ hole)

7 simple assembly, as long as access to the source and power to enter the commissioning.

8 one button start, easy to operate.

Technical configuration:

Name and model: straight row hole punch number: V2.0, AT-Hold-Lx40-V2.0

Standard configuration: straight row hole punch V2.0 1, compressed air filter 1, power line 1.

Rated voltage: AC220V50HzSource: 0.5MPA = input

The tool clamping: three claw chuckTool range: 0.3-4.5mm

Motor speed: 0~3000RPM stepless speed regulation

Motor stroke: 10MM, limited current stepless speed regulation.

Feed rate: numerical control setting, up to 100mm/s

Maximum stroke: 500mm

Number of holes: numerical control settings, the maximum can be set up to 40Hole spacing: numerical control setting.

Adjustment precision: 0.02mm

Aperture processing range: 0.3-4.0mm

Diameter processing range: 2.0-10.0mm

Applicable materials: PVC, PU, HDPE, LDPE, PP, PA, PEBAX, FEP, etc.

Copyright © 2015 - 2016 .All Rights Reserved - Shenzhen Automation Technology Co,Ltd-www.te-auto.com TEL:+86-755-89303280 QQ:271371474 E-mail:sale@te-auto.com