+86-13760274054 中文版 English

Pneumatic Single Hole Drilling Machine

The equipment is mainly used for medical plastic catheter punching hole. The knife lock is use three way of drill chuck. It can adapt to the hollow cutter 0.3-4mm. Equipped with a reset push out structure, reset will waste ejection from the hollow cutter. Punching height and position can be adjusted freely.

DETAILS

u Speed freedom adjustable.

u Pneumatic adjustment of drilling and retracting speed.

u Push out when reset, automatic push out waste ejection.

u The assembly is simple, as long as access to the air supply and the power supply enable debugging.

u The pneumatic foot switch valve, easy to operate.

Ø Name and model:

Pneumatic Single Hole Drilling Machine-V1.0

Serial number: AT-Drill-1X- Pneumatic -V1.0

Ø Standard configuration:

The main machine: 1 pc

Foot valve:1 pc

Power line: 1pc.

Ø Rated voltage: AC 220V 50Hz

Ø Source input: Less than 0.5MPA

Ø Cutter lock: Three claw lock

Ø Cutter range: 0.3-4.5mm

Ø Motor speed: adjustable

Ø Motor displacement range: max 20mm, adjustable

Ø Processing hole diameter: 0.3-4.0mm

Ø Hole type: Positive circular hole, side hole.

Ø Applicable materials: PVC, PU, HDPE, LDPE, PP, PA, PEBAX, FEP etc.

Copyright © 2015 - 2016 .All Rights Reserved - Shenzhen Automation Technology Co,Ltd-www.te-auto.com TEL:+86-755-89303280 QQ:271371474 E-mail:sale@te-auto.com